OMB MMS 412 Potentiometers Slider Source

[opacheco]

Hi,

I need to replace the Slider Potentiometers for this unit and the OMB discontinue this potenciometers, I found that units are made for ALPHA but I get any response when I tried to contact to them, however they sell 1000 min units for least and this in not may able to pay for 1000 slider potentiometers when I need only 8 units!!!...Anyway, Do someone know where I can get this kind of parts???


I found a similar potentiometers in MOUSER(Mouser Stock No. 312-9301F-10K) but this units is a single units(mono), I need the Dual Unit(Stereo).

******//www.mouser.com/catalog/specsheets/TW-700133.pdf

I will wait for any comments,
Opacheco.

[Mixermend]

You might like to look for other makes of slide fader potentiometer - ALPS make 60mm dual channel faders, which are widely available - there are also Bourns PTA6044-2015DP-A103 types which should be suitable.

These are easily available in the UK, so I assume that Newark, Digikey and Mouser in the US should have them also.

You might need to get new knobs also - as possibly the shaft, or tang will be different with a substitute make of fader.

[opacheco]

Originally Posted by Mixermend

You might like to look for other makes of slide fader potentiometer - ALPS make 60mm dual channel faders, which are widely available - there are also Bourns PTA6044-2015DP-A103 types which should be suitable.

These are easily available in the UK, so I assume that Newark, Digikey and Mouser in the US should have them also.

You might need to get new knobs also - as possibly the shaft, or tang will be different with a substitute make of fader.

Mixermend,
Thanks a lot for your response!!...I will check like you told!

Opacheco