Console help plz!!

audioman86 · 16th January 2012

Hey guys i recently bought a 48 Channel D&R Octagon. Recently the output from near field (to my monitors) stopped working. It's as if everything from the CRM and Nearfield pot have no output at all.

I have worked a way around it by using the main outputs on a dsub connector from the patch bay. But its so annoying because I can't control the master volume anymore!

Anyone with ideas plz help!!

I live in Australia, Melbourne...

Cheers

KlangDialog · 3 Weeks Ago

Hey, i alos work with a Octagon,
i think it deppends on the Main Board of the Back of the Desk where the Outputs for the Speakers are. Every Speaker is switch by a Blue Relai that switsh the Speaker on. Please check if this Relai work (if the Clack while changing the Speakers), the next Question is if the VCA Board that controles the CRM Output is working. You can messure before and after the VCA Board in the Octagon to see if the Audio Signal is getting in and if its getting out incl changing the Volume with the VCA, good Luck Best Regards Sebastian

jensenmann · 3 Weeks Ago

Hey Sebastian, just finished reading the article about you and your studio build. Respect, well done !!!

Check this thread, please, you´re invited: Techtalk :: View topic - MIschpultvergleichsstest in Baden Baden

16th January 2012	#1
audioman86 Gear interested Joined: Jan 2012 Posts: 7 Thread Starter	Console help plz!! Hey guys i recently bought a 48 Channel D&R Octagon. Recently the output from near field (to my monitors) stopped working. It's as if everything from the CRM and Nearfield pot have no output at all. I have worked a way around it by using the main outputs on a dsub connector from the patch bay. But its so annoying because I can't control the master volume anymore! Anyone with ideas plz help!! I live in Australia, Melbourne... Cheers

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Fix My Console?	ajfarber	Remote Possibilities in Acoustic Music & Location Recording	4	9th October 2007 08:06 PM
Ditching my Console...HELP!	Doublehelix	So much gear, so little time!	20	6th December 2006 03:31 PM
Help Help plz help	lexxon	High end	5	22nd May 2006 07:57 AM
Help Help plz help	lexxon	Rap + Hip Hop engineering & production	1	22nd May 2006 04:31 AM
Mastering Experts Help plz !	acidrulez	High end	6	19th December 2003 09:47 AM

3 Weeks Ago	#2
KlangDialog Gear interested Joined: May 2012 Posts: 5	Hey, i alos work with a Octagon, i think it deppends on the Main Board of the Back of the Desk where the Outputs for the Speakers are. Every Speaker is switch by a Blue Relai that switsh the Speaker on. Please check if this Relai work (if the Clack while changing the Speakers), the next Question is if the VCA Board that controles the CRM Output is working. You can messure before and after the VCA Board in the Octagon to see if the Audio Signal is getting in and if its getting out incl changing the Volume with the VCA, good Luck Best Regards Sebastian

3 Weeks Ago	#3
jensenmann Lives for gear Joined: Aug 2008 Location: Karlsruhe, Germany Posts: 723	Hey Sebastian, just finished reading the article about you and your studio build. Respect, well done !!! Check this thread, please, you´re invited: Techtalk :: View topic - MIschpultvergleichsstest in Baden Baden