All Advertisers
| All Advertisers |
9th March 2010
| #1 |
| Gear interested Join Date: Mar 2010
Posts: 10
Thread Starter | Broken Outputs Akai S950? I have an Akai S950 sampler but unfortunately I cannot get it to output and sound I have routed the internal tone (as well as loaded samples) to the Mix Output, L&R Outputs as well as Outputs 1-8 - and no sound at all If I sample using the Line in Or MIc on the Front then I get sound coming out of the Mix Out Output Anyone got any ideas what could be wrong? I opened it up but there are no cables loose shame to let this old lady go to graveyard...... |
|  |
|
18th March 2010
| #2 |
| Gear interested Join Date: Mar 2010
Posts: 10
Thread Starter | wheres the geeks hanging out?  |
|
| |
|
20th March 2010
| #3 |
| Gear maniac  Join Date: Feb 2009 Location: Discordia
Posts: 262
| Go probing with a scope is probably the best solution. Then you'll see how far the signal goes. If you're lucky it could just be a loose ribbon/multi connector from the main PCB to the jack card on the back, if this is how it's built; i've never been inside one. Good luck! |
|
| |
New Reply 
Facebook
Twitter
LinkedIn
| Thread Tools | Search this Thread |
| Similar Threads | ||||
| Thread | Thread starter | Forum | Replies | Last Post |
| Can I use these for my Akai S950?? | jonnypowell | Electronic Music Instruments & Electronic Music Production | 5 | 15th July 2009 04:36 AM |
| Akai S950 Should I sell? | CJ1973 | Rap + Hip Hop engineering & production | 14 | 18th May 2009 09:33 AM |
| Akai S950 / S1000 | Dave Reid | Rap + Hip Hop engineering & production | 31 | 17th August 2008 02:39 AM |
| Akai S950 Help | King Dread | Electronic Music Instruments & Electronic Music Production | 5 | 13th April 2008 10:25 AM |
| |
