if anyone needs it Tascam manuals/schematics now up - AnalogRules.com

Goreski · 25th December 2008

I hope no one here needs this - but I scanned the 80-8 manual and schematics today if ya do. Other Tascam stuff is up as well...

It's up for FREE download at my site: AnalogRules.com

Go to the Manuals link on the main page.

Every once in a while someone brings one of these OLD beasts into my shop for repair, so I thought since the many manuals and schematics are NOT available for FREE anywhere else I'd better put it up in case any of you get one of these old old old machines in for repair and ya ain't got the schematics and manual and schematics handy.

It's getting to be a bitch to find some of this old stuff on the internet, where it all should be up for anyone to grab when they need it... but it ain't so. Thus it's better to put up everything I can in case anyone needs this stuff.

manuals and schematics should be available and FREE - 'cause that's they way it should be!

regards,

Goreski

Jidis · 26th December 2008

Goreski,

From someone who has wasted way too much time fishing the net for service docs, much thanks for the resource!

Should you get hold of a SM (or even owner's manual) for Tascam's Porta Two (not "02"), let me know. I've got docs for my pile of other Tascams, but not that one. Some of mine have gotten sort of ragged and I've been planing to figure out how to scan that stuff as well. If I can get any done, I'll keep you in mind. Right now, it's: 34B(om/sm), 234(sm), 122(om/sm), 122mkII(om/sm) and a Teac 435X(om/sm).

Appreciated,

George

Andrew_Chart · 28th December 2008

Thanks for this! Great site!

I know of a place that has a Tascam MSR24 and I'm very interested in finding the manual for it. It's not anywhere obvious but I'm still crossing my fingers it is around somewhere so I'm going to dig a little deeper soon. If I do manage to find it (and presuming you don't already have it) I wouldn't mind scanning it in sometime to make it available.

25th December 2008	#1
Goreski Gear nut Joined: Aug 2007 Location: San Francisco Posts: 104 Thread Starter	if anyone needs it Tascam manuals/schematics now up - AnalogRules.com I hope no one here needs this - but I scanned the 80-8 manual and schematics today if ya do. Other Tascam stuff is up as well... It's up for FREE download at my site: AnalogRules.com Go to the Manuals link on the main page. Every once in a while someone brings one of these OLD beasts into my shop for repair, so I thought since the many manuals and schematics are NOT available for FREE anywhere else I'd better put it up in case any of you get one of these old old old machines in for repair and ya ain't got the schematics and manual and schematics handy. It's getting to be a bitch to find some of this old stuff on the internet, where it all should be up for anyone to grab when they need it... but it ain't so. Thus it's better to put up everything I can in case anyone needs this stuff. manuals and schematics should be available and FREE - 'cause that's they way it should be! regards, Goreski

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
I found my TASCAM 3500 manuals and shematics	George Necola	Geekslutz forum	12	13th October 2011 11:30 AM
Need schematics / manuals for gates console	jaguarmusicboy	Geekslutz forum	1	1st August 2011 01:32 AM
Tascam M-35 mixer--info/manuals, anyone?	millionVALVE	So much gear, so little time!	1	19th March 2008 10:48 PM
Schematics, Manuals, ETC...	Orange_METaL	Geekslutz forum	1	29th November 2006 12:08 PM
Console Manuals (and schematics) for all !!!??!!...(a database)	quadwould	High end	14	12th July 2004 09:39 PM

26th December 2008	#2
Jidis Lives for gear Joined: Jul 2007 Posts: 1,030	Goreski, From someone who has wasted way too much time fishing the net for service docs, much thanks for the resource! Should you get hold of a SM (or even owner's manual) for Tascam's Porta Two (not "02"), let me know. I've got docs for my pile of other Tascams, but not that one. Some of mine have gotten sort of ragged and I've been planing to figure out how to scan that stuff as well. If I can get any done, I'll keep you in mind. Right now, it's: 34B(om/sm), 234(sm), 122(om/sm), 122mkII(om/sm) and a Teac 435X(om/sm). Appreciated, George

28th December 2008	#3
Andrew_Chart Gear Head Joined: Oct 2007 Posts: 61	Thanks for this! Great site! I know of a place that has a Tascam MSR24 and I'm very interested in finding the manual for it. It's not anywhere obvious but I'm still crossing my fingers it is around somewhere so I'm going to dig a little deeper soon. If I do manage to find it (and presuming you don't already have it) I wouldn't mind scanning it in sometime to make it available.