Gyraf SSL

Teacher · 13th May 2005

Finished DIYing....BUT the only knobs that work are the make up gain, bypass and power switch. I didn't build this so I won't be able to answer questions asked but I will forward them to the builder. If needed later tonite I will take pictures of the inside. It could be working very subtley..but its a SSL so shouldn't the compression be very obvious?

Thanks

BTW threshold is definitly not working doesn't do anything when I twist it either way

PS.. Don't think it matters but the all the ins and outs on the compressor are females because radio shack didn't have any males at the time

gyraf · 13th May 2005

Look through the error-fixing posts and questions over at GroupDIY.org:

http://www.prodigy-pro.com/forum/viewtopic.php?t=110

specially the thread

http://www.prodigy-pro.com/forum/viewtopic.php?t=47

which is the main error-tracing thread..

Most errors are:

- Wrong components
- Bad soldering shorting traces
- Components mounted wrong

These are more than 90% of the errors we see..

Jakob E.

Teacher · 13th May 2005

Quote:

Originally Posted by gyraf

Look through the error-fixing posts and questions over at GroupDIY.org:

http://www.prodigy-pro.com/forum/viewtopic.php?t=110

specially the thread

http://www.prodigy-pro.com/forum/viewtopic.php?t=47

which is the main error-tracing thread..

Most errors are:

- Wrong components
- Bad soldering shorting traces
- Components mounted wrong

These are more than 90% of the errors we see..

Jakob E.

Thank you sir. You are a gentlemen and a scholar

13th May 2005	#1
Teacher Lives for gear Joined: Sep 2002 Location: NY Posts: 1,913 Thread Starter	Gyraf DIY SSL Finished DIYing....BUT the only knobs that work are the make up gain, bypass and power switch. I didn't build this so I won't be able to answer questions asked but I will forward them to the builder. If needed later tonite I will take pictures of the inside. It could be working very subtley..but its a SSL so shouldn't the compression be very obvious? Thanks BTW threshold is definitly not working doesn't do anything when I twist it either way PS.. Don't think it matters but the all the ins and outs on the compressor are females because radio shack didn't have any males at the time __________________ "I hate it when they tell us how far we came to be, as if our people's history started with slavery...." Immortal Technique www.sicbeats.com Last edited by Teacher; 15th May 2005 at 02:42 PM.. Reason: Changed the title

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
gyraf ssl clone compressor	stealthbalance	So much gear, so little time!	13	22nd January 2011 07:30 PM
Anybody using Gyraf G14 EQ ?	ISedlacek	High end	3	28th August 2006 08:21 PM
Substitute for DBX 202 chip when Building Gyraf SSL CLONE?	Teacher	Geekslutz forum	6	19th August 2004 09:15 AM
MAKING GYRAF SSL CLONE...BUT WHERE DO I GET THIS?(DBX2150)	Teacher	Geekslutz forum	9	12th August 2004 09:15 AM
Gyraf ´Boys	anne_paranoid	So much gear, so little time!	1	28th April 2004 02:51 PM

13th May 2005	#2
gyraf Lives for gear Joined: Jun 2002 Location: Denmark Posts: 667	Look through the error-fixing posts and questions over at GroupDIY.org: http://www.prodigy-pro.com/forum/viewtopic.php?t=110 specially the thread http://www.prodigy-pro.com/forum/viewtopic.php?t=47 which is the main error-tracing thread.. Most errors are: - Wrong components - Bad soldering shorting traces - Components mounted wrong These are more than 90% of the errors we see.. Jakob E.