All Advertisers
| All Advertisers |
| |||||||
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sennheiser MD 421 tuchel to XLR | diegitarre | So much gear, so little time! | 5 | 22nd January 2008 09:24 PM |
| 6 PIN DIN Cable (As used for old Roland synths) | Mount Cyanide | Geekslutz forum | 2 | 1st August 2007 07:16 AM |
| Large Tuchel (DIN 41624) | MATTI | So much gear, so little time! | 7 | 17th July 2006 03:35 PM |
| Wiring for Sennheiser 441 N with 3 pin DIN | Ruairi | So much gear, so little time! | 2 | 24th February 2004 03:12 PM |
 |
| | Thread Tools | Search this Thread | Rate Thread | Display Modes |
14th June 2008, 05:46 AM
| #1 |
| Gear Head  Join Date: Mar 2006 Location: Mexico City
Posts: 52
 | pin convention for a Tuchel din md-421 Hi everybody, I needed to change the cable and checked the pin numbers before removing Tuchel din, but seemingly I made a mistake becasue I get a very low volume and also get hum if I touch the mic's chassis, so I'm sure I soldered ground to either hot or cold, but not sure which. Does ne1 know the convention ? Thanks. DP
__________________ "If you've heard this story before, don't stop me, because I'd like to hear it again." Groucho Marx |
|  |
|
14th June 2008, 07:59 AM
| #2 |
| Gear Head Join Date: Mar 2006 Location: Mexico City
Posts: 52
| Thanks for looking. I figured it out. DP
__________________ "If you've heard this story before, don't stop me, because I'd like to hear it again." Groucho Marx |
|
| |
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
| |
Linear Mode
