Harrison Channel Strip to swap for strip

SAnthony · 14th June 2007

I am looking to swap a Harrison AP 100 Channel Strip for a different channel strip. The AP 100 has the familiar 4 Sweepable bands with a Hi and Lo Shelve EQ. 2 Echo sends. I don't have a schematic, but this seems to be basically a line mixer circuit. It has the usual Penny and Giles Fader with VCA. Also Automated A and B selectable inputs, an Automated Pad/Gain control (-10,0,+10,+20 dB). This would be an ideal module to rack up. I would like to swap for Either Harrison MR2, MR3, 3232, Audix, Tangent, Trident, Amek, Tac, MCI, SSL, NEVE, Midas, Allen & Heath, or hi end Yamaha Channel Strip. I am looking to build a Frankenstein Tracking Console with Modules from various Manufacturers.
Thanks...Take Care,
Shawn

40W · 9th July 2007

Quote:

Originally Posted by SAnthony

I am looking to swap a Harrison AP 100 Channel Strip for a different channel strip. The AP 100 has the familiar 4 Sweepable bands with a Hi and Lo Shelve EQ. 2 Echo sends. I don't have a schematic, but this seems to be basically a line mixer circuit. It has the usual Penny and Giles Fader with VCA. Also Automated A and B selectable inputs, an Automated Pad/Gain control (-10,0,+10,+20 dB). This would be an ideal module to rack up. I would like to swap for Either Harrison MR2, MR3, 3232, Audix, Tangent, Trident, Amek, Tac, MCI, SSL, NEVE, Midas, Allen & Heath, or hi end Yamaha Channel Strip. I am looking to build a Frankenstein Tracking Console with Modules from various Manufacturers.
Thanks...Take Care,
Shawn

Anyone know where I could get some MR3 channel strips in good working order?

bluestarbass · 10th July 2007

This is something ive been thinking about lately. How feasable is it to do this>? I have a 10 channel DDA on a 16 channel frame. I have the connections there for 6 more channels, could i just but your typical channel strip and pop it in??

A more complicated question, How hard would it be to basically build a rack inside the 6 channel bay for 500 series modules? Impossible or too expensive?

14th June 2007	#1
SAnthony Gear nut Joined: May 2007 Location: New Orleans Posts: 128 Thread Starter	Harrison Channel Strip to swap for strip I am looking to swap a Harrison AP 100 Channel Strip for a different channel strip. The AP 100 has the familiar 4 Sweepable bands with a Hi and Lo Shelve EQ. 2 Echo sends. I don't have a schematic, but this seems to be basically a line mixer circuit. It has the usual Penny and Giles Fader with VCA. Also Automated A and B selectable inputs, an Automated Pad/Gain control (-10,0,+10,+20 dB). This would be an ideal module to rack up. I would like to swap for Either Harrison MR2, MR3, 3232, Audix, Tangent, Trident, Amek, Tac, MCI, SSL, NEVE, Midas, Allen & Heath, or hi end Yamaha Channel Strip. I am looking to build a Frankenstein Tracking Console with Modules from various Manufacturers. Thanks...Take Care, Shawn

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Waves SSL Channel vs Metric Halo Channel Strip	luctellier	Music computers	14	19th March 2010 11:02 AM
New channel strip	doubledecker	So much gear, so little time!	23	26th January 2007 07:01 PM
Channel Strip	macr0w	High end	8	16th January 2006 09:39 PM
Harrison MR4 Raven ch strip question	burntrax	Geekslutz forum	2	16th October 2005 02:59 AM
channel strip help...	halfguard	Rap + Hip Hop engineering & production	1	18th August 2005 06:52 AM

10th July 2007	#3
bluestarbass Gear addict Joined: Nov 2006 Location: Indianapolis Posts: 344	This is something ive been thinking about lately. How feasable is it to do this>? I have a 10 channel DDA on a 16 channel frame. I have the connections there for 6 more channels, could i just but your typical channel strip and pop it in?? A more complicated question, How hard would it be to basically build a rack inside the 6 channel bay for 500 series modules? Impossible or too expensive?