Hi-Pass Filter of the PM-1000

[yaniv]

Hi,

I want to make some experiments on the Hi-Pass Filter.

I realize that the inductors are not familar to me ...

The "556O" connected to 0.47uF and the "582A" connected to 1uF.

Can you tell me what are the values of the inductors ( 8.2h and 5.6h ?! ) and the
"556O" and "582A" means ?

what kind of inductors are they ? and how can I order them ?

Thanks A lot !!

[yaniv]

Knows ?!?

[idylldon]

Originally Posted by yaniv

Hi,

I want to make some experiments on the Hi-Pass Filter.

I realize that the inductors are not familar to me ...

The "556O" connected to 0.47uF and the "582A" connected to 1uF.

Can you tell me what are the values of the inductors ( 8.2h and 5.6h ?! ) and the

I'm not clear about what you're asking. The values are 8.2H and 5.6H, the "H" stands for "Henries."

"556O" and "582A" means ?

Some sort of ID numbers for the mfg. or the supplier I suppose.

what kind of inductors are they ?

Looks like they are just regular inductors. I'm not sure what you're asking.

and how can I order them?

Don't know if you can get the exact values in the same footprint, and since you didn't post your location (I'm assuming Eastern Europe) I don't know where you'd look for them. There are some European suppliers (Farnell comes immediately to mind, but there are others) that most likely carry inductors.

I see you've posted on the Prodigy DIY forum. Do a search on that forum for "PM1000" and you'll turn up some info on tweaking the EQ section of these strips. Personally, I use these strips and never use the EQ section, but, then again, I seldom EQ anything on the front end of the recording process.

Cheers,
==
Don