How to get this sound using Ableton?

[ark]

I'd start with Analog + ping-pong delay. Need to fuss with the ADSR envelope on both the amplitude and filter.

[Yoozer]

You should be able to do this with Massive.

Massive's default wavetable is pretty suitable for this; the sound is a mix between saw and square. Filter cutoff nearly all the way down, resonance at 20% or so; probably want the Daft filter for this. Synced delay.

Use a relatively short attack in the filter envelope initially - what happens with the sound here is that the attack is modulated throughout the track.

[newsounds]

Originally Posted by Yoozer

You should be able to do this with Massive.

Massive's default wavetable is pretty suitable for this; the sound is a mix between saw and square. Filter cutoff nearly all the way down, resonance at 20% or so; probably want the Daft filter for this. Synced delay.

Use a relatively short attack in the filter envelope initially - what happens with the sound here is that the attack is modulated throughout the track.

I tried what you said and I get more of a flute sounding synth.

[ark]

I think you need to modulate the filter cutoff.

[Schwarzwald]

Taking Ark's advice, I had some time, and tried to figure it out in Analog.

Here's the instrument rack preset I did:
http://dl.dropbox.com/u/8004450/Milwakuee%20Lead.adg

Not exactly it, as Yoozer said, the Attack seems modulated, the filter is either keytracked, or has a little bit of an LFO attached to it. IDK, I stopped when I got bored, LOL. But anyway, hope it gets the general idea across.

[Yoozer]

Originally Posted by newsounds

I tried what you said and I get more of a flute sounding synth.

Well, put the WT knob more towards "saw" then.

[newsounds]

Originally Posted by Yoozer

Well, put the WT knob more towards "saw" then.

I can't seem to get it, mind saving the preset so we're on the same page?