Hi,
Do any of you have any experience moding this mixer to have pre-fader AUX sends?
Wish it were as simple as with the Behringer 1604A...
Quote:
Mono channel Aux Send 2 > pre-fader
Mono channel Aux Sends 2 are post-fader. If you want to convert them, carry out the modification described below to each mono channel you want to be altered. The right PCB area is indicated by a yellow printing (see figures below).
1) Switch desk off and disconnect it from the mains supply!
2) Cut the "post" track.
3) Add in a "pre" link.
Repeat for all mono channels you want to be modified.
 |
Regards,
Jostein
New Reply 
Facebook
Twitter
LinkedIn
