#1 Lives for gear
Joined: Aug 2011
Location: New Jersey
Posts: 985
Thread Starter
Syncing your juno 60 arp a DAW without DCB
It is possible to sync the juno 60s arp to a DAW. Today i made a quick beat. While noodling around, I found out that you can sync the Juno 60s arpeggiator to say logic. You must have a sync box for your drum machine. I used the kenton pro solo II. The pro solo was used to sync a linndrum to logic. From the linndrums trigger out, i patched into the junos Arpeggiator clock Input. Once the linndrum is played a beat, triggered off logic. the arpeggiator stayed in time. The drums dont even have to be recorded. The drum machine can be used just as a sync medium.
__________________
#2 digital ears love analog
Joined: Aug 2011
Posts: 2,609
I've done something similar, except I used a midi sequencer and triggered my Jx-3P's sequencer from a midi-to-cv interface.
__________________
Synths: Juno-1, Xio 25, HS-80, TX81z, Fatman, JX-3P, DX9, http://rogue-ai.bandcamp.com/ https://soundcloud.com/rogueai-dnb/never-lose-a-beat-feat
#3 Gear addict
Joined: Oct 2007
Location: Los Angeles
Posts: 498
you can just send midi clock to the Kenton, then clock out of the Kenton to the Juno 60 Clock In and bypass the drum machine altogether..I do this all the time with my Pro2000.
#4 Lives for gear
Joined: Aug 2011
Location: New Jersey
Posts: 985
Thread Starter
but can you adjust the quantization? On the linn you can select different pulses for note length.
#5 Gear addict
Joined: Oct 2007
Location: Los Angeles
Posts: 498
Quote:
Originally Posted by
javd007 but can you adjust the quantization? On the linn you can select different pulses for note length.
you set the clock divide on the kenton to adjust to 1/8th's or 1/16th's or whatever, is that what you mean by quantization/note length?
#6 Lives for gear
Joined: Aug 2011
Location: New Jersey
Posts: 985
Thread Starter
Yes, I leave it on d4 for the linn sync what do I set it for other ratios?
#7 Gear addict
Joined: Oct 2007
Location: Los Angeles
Posts: 498
Quote:
Originally Posted by
javd007 Yes, I leave it on d4 for the linn sync what do I set it for other ratios?
there's a chart in the manual but basically its 24 for 1/4, 12 for 1/8ths, 6 for 1/16ths. you can set the inbetween values for triplets..
#8 Lives for gear
Joined: Nov 2008
Posts: 796
alternatively try sending a VERY hot clav sample out your interface into the trigger input
#9 Lives for gear
Joined: Aug 2011
Location: New Jersey
Posts: 985
Thread Starter
The arp input ...Such a simple design yet brilliant.
#10 Lives for gear
Joined: Feb 2005
Location: UK
Posts: 4,055
i found a 606 kick sample works best!
#11 Lives for gear
Joined: Jul 2009
Location: pasadena, ca
Posts: 650
^^^ 606 kick? interesting, triggering from the 606 trigger outs works well i feel, from a monotribe too
__________________
#12 Gear Head
Joined: May 2011
Location: BC
Posts: 53
Extremely hot Square Wave will do the trick. Works for Polysix too.
New Reply 
Facebook
Twitter
LinkedIn
