Arp Odyssey issue

[Futureman84]

How did you clean the pot?

If, at the bottom of it's throw, the fader still has some resistance, then the ringmod/noise will bleed through.

From memory, it's a simple mixer, so I'd blame the pot.

How bad is the bleed?

[remote337]

Originally Posted by xparis001

Hi all,

I was hoping there was somebody with an Arp Odyssey who could either let me know this is normal, or possibly an arp expert who can point me in a direction.

soo, on my arp, when all the levels are down in the mixer except for the VCA, I still hear some bleed through. it sounds like the ring mod, because it definitely changes to a white noise sound when i switch to noise. I've cleaned the pots several times, but still the issue persists.

questions - do they all do this? if not, anyone know where to start looking? the pot seems to be functional.

thanks!
-dan

Its not normal I just checked. Sounds to me like one of the sliders isn't returning to zero properly.

[xparis001]

well, it's a little more mysterious than that now. When I hear bleedthrough, it's pre-filter. I'm pretty sure the faders in the mixer are post, or am I wrong on that?

[fxs]

Had the same problem with mine, cured it with a recap,

Cheers

Francisco Straub