Mopho CCs

Acid Hazard · 25th December 2008

Does anyone know if the Sub Osc levels are controllable via CCs? I'm not seeing it in the manual, but it seems it SHOULD be. Is this undocumented?

Basic Elements · 25th December 2008

It seems like only some parameters are adjustable with midi CC and the rest are non-specific program messages

Introspective · 25th December 2008

Yep, Basic Elements is right. You will have to use NRPN numbers 114 and 115 for the subs.

Without wanting to hijack the thread - can anybody tell me how to edit NRPN data that goes above 127 within Logic? For example the cutoff goes from 0-164 on the Mopho but it seems impossible to get above 127 in Logic...

I know you can assign the cutoff to the mod wheel and automate that to get the full range, but there are other parameters that go above 127 on the Mopho that i want to control at the same time...

Thanks,

Mike.

25th December 2008	#1
Acid Hazard Lives for gear Joined: Aug 2007 Location: Seattle, WA Posts: 3,187 Thread Starter	Mopho CCs Does anyone know if the Sub Osc levels are controllable via CCs? I'm not seeing it in the manual, but it seems it SHOULD be. Is this undocumented? __________________ Synths: SH-101 . @Juno-1 . Akai AX60 . x0xb0x . FR XS . uWave II . Blofeld . Monotribe . Monotron . Monotron Delay Drum Machines: TR-707 . Procussion New DJ Mix - AcidTed - Question Everything

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Mopho Sound Editor	Strobian	Electronic Music Instruments & Electronic Music Production	46	1 Week Ago 01:33 AM
My MoPho just arrived	Acid Hazard	Electronic Music Instruments & Electronic Music Production	67	25th February 2009 11:58 PM
MOPHO sync with Logic ?	dsound	Electronic Music Instruments & Electronic Music Production	12	23rd November 2008 08:47 PM
Mopho Percussion	Acid Hazard	Electronic Music Instruments & Electronic Music Production	3	22nd October 2008 03:03 PM
learning CCs to your midi keyboard in pro tools?	n8tron	Music computers	4	19th February 2007 06:23 AM

25th December 2008	#2
Basic Elements Gear interested Joined: May 2008 Posts: 23	It seems like only some parameters are adjustable with midi CC and the rest are non-specific program messages

25th December 2008	#3
Introspective Gear nut Joined: Dec 2008 Posts: 83	Yep, Basic Elements is right. You will have to use NRPN numbers 114 and 115 for the subs. Without wanting to hijack the thread - can anybody tell me how to edit NRPN data that goes above 127 within Logic? For example the cutoff goes from 0-164 on the Mopho but it seems impossible to get above 127 in Logic... I know you can assign the cutoff to the mod wheel and automate that to get the full range, but there are other parameters that go above 127 on the Mopho that i want to control at the same time... Thanks, Mike.