1983 doepfer voice card [VMS], anyone has docs?

1954U1 · 5th July 2008, 05:24 AM

Hi.
I've bought 4 old doepfer cards.
[VMS = Voice Modular System]

Each card is indeed a synth based on CEMs, namely:
2x CEM3340
2x CEM3310
1x CEM3320
1x CEM3330

Along with the cards, there is a technical paper, written in german..
a bit difficult for me to translate.. but not impossible.. too much difficult is for me to understand how to connect a keyb..

And heres the question:
do anyone has connected this beast to a poly keyboard?

Thanks!

1954U1 · 27th July 2008, 01:54 PM

I've made some big steps..

Found and understood all the 64pins connections, and also the [onboard!] CV-in.

I've also scanned and half-translate the most important pages of the german docs.

Next step will be testing a single voice card..
If all OK, I'll continue with the making of the front panels.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What a difference 25 years makes - Electronic Music primer circa 1983	GilWave	Electronic Music Instruments & Electronic Music Production	4	11th March 2007 07:17 AM

5th July 2008, 05:24 AM	#1
1954U1 Gear nut Join Date: Mar 2007 Location: Milano, Italy Posts: 123	1983 doepfer voice card [VMS], anyone has docs? Hi. I've bought 4 old doepfer cards. [VMS = Voice Modular System] Each card is indeed a synth based on CEMs, namely: 2x CEM3340 2x CEM3310 1x CEM3320 1x CEM3330 Along with the cards, there is a technical paper, written in german.. a bit difficult for me to translate.. but not impossible.. too much difficult is for me to understand how to connect a keyb.. And heres the question: do anyone has connected this beast to a poly keyboard? Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

27th July 2008, 01:54 PM	#2
1954U1 Gear nut Join Date: Mar 2007 Location: Milano, Italy Posts: 123	I've made some big steps.. Found and understood all the 64pins connections, and also the [onboard!] CV-in. I've also scanned and half-translate the most important pages of the german docs. Next step will be testing a single voice card.. If all OK, I'll continue with the making of the front panels.