Need Native Instruments Help!!!!

c.dizzle · 12th April 2008, 04:23 AM

Guys,

I am running Cubase 4 on OSX 10.4.11 with Reaktor 5 and Absynth 4. Am I crazy or are they both NOT plug in delay compensated?!?!? PLease give me some insight, clarity, etc. I ran some drums through one of Reaktor's compressors, duplicated the track and removed the reaktor plugin to sneak in the dry signal and I got phasing. The same happens when i run guitars through Absynth's filters and try to include a dry track. This sucks. Am I overlooking something, doing something wrong? Please help.

Thanks

Carl

c.dizzle · 15th April 2008, 11:16 PM

Anybody??????

15th April 2008, 11:30 PM

****head

n***N · 15th April 2008, 11:34 PM

check your latency settings...It should not be higher than 15 ms. Personally, I never used more than 10.

jupiter8 · 15th April 2008, 11:44 PM

You can turn of delay compensation can you not ? Check that it is on. And i believe you can have it turned off for plugins with higher than x ms latency (where x is user adjustable). Look in the manual about delay compensation, that's the best tip i can give for the moment.

Could be the NI plugins does'nt report their latency to Cubase but that sounds highly unlikely.

c.dizzle · 16th April 2008, 10:30 PM

Thanks guys!

Yeah, I'm currently checking to see if PDC is disabled. I used to be on Nuendo and I remember it being easier to find.

Also, to quote jupiter 8, "And i believe you can have it turned off for plugins with higher than x ms latency (where x is user adjustable)." This is very interesting, I was unaware of this. I'll check on this as well.

To divine chemical; If it's digital there's latency, hardware or software. There's plenty of good digital both hardware and software. Native Instruments is one of the few companies that is making software with no analog equvalents. Analog vs. didgital, hardware vs. software is a dull, tired debate.

I put in an e-mail to native instruments as well, waiting on their response.

pyvnd · 16th April 2008, 11:13 PM

Don't mind DC, he has a lot of opinions.

I was going to suggest you contact NI as well simply because they are the best at the technical aspects of their software. It takes a little while but they usually respond with something useful.

c.dizzle · 17th April 2008, 02:56 AM

no worries!

i actually kinda wish that NI would come out with a hardware version of Reaktor ala Kyma. but that's neither here nor there.

I got a response and am e-mailing my session to NI.

I tried toggling the constrain delay comp on and off. There is a change in tone but it still phases.

For more info, I have a stereo drum loop on a track. The track has been duplicated and reaktor's FlatBlaster is placed on the track. I've got my wet and dry. And they phase!!!!! They shouldn't.

I've been interested in abusing some of the more traditional processing and fx in the NI catalog to find out if any of it has a unique sound of it's own. Like, for instance, "Gee I love the sound of FlatBlaster and a Neve 1081 on that snare!" I'll share any cool findings.

carl

P.S. My old boss just bought Glen Ballard's euphonix console!!!!! the one Alanis Morisette's Jagged Little Pill was done on!!! LOL!!!

Clem Snide · 17th April 2008, 12:57 PM

Quote:

Originally Posted by c.dizzle

i actually kinda wish that NI would come out with a hardware version of Reaktor...

It would have to be delivered by an aircraft carrier.

ass_tronaut · 21st May 2009, 07:11 AM

Hey im running protools 7 on a hd system and am trying to get ni komplete 2 to run via protools. I have tried to update ni komplete and the updates dont seem to work. The programs run stand alone fine but wont show up in RTAS plug ins in protools. ANy help would be good!!!

Should i upgrade to PT 8 b4 i continue with this BS?

12th April 2008, 04:23 AM	#1
c.dizzle Gear nut Join Date: Feb 2003 Location: pittsburgh, pa Posts: 80	Need Native Instruments Help!!!! Guys, I am running Cubase 4 on OSX 10.4.11 with Reaktor 5 and Absynth 4. Am I crazy or are they both NOT plug in delay compensated?!?!? PLease give me some insight, clarity, etc. I ran some drums through one of Reaktor's compressors, duplicated the track and removed the reaktor plugin to sneak in the dry signal and I got phasing. The same happens when i run guitars through Absynth's filters and try to include a dry track. This sucks. Am I overlooking something, doing something wrong? Please help. Thanks Carl

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Native Instruments - 3 New Products	slaves666	New Product Alert!	18	30th October 2007 06:45 PM
Native Instruments Kontakt 2	jjay13	Electronic Music Instruments & Electronic Music Production	17	13th September 2007 11:42 AM
Native Instruments Komplete EDU	matt f	Music computers	2	7th April 2007 07:01 PM
PT 6.7 and Native Instruments	Renie	Music computers	2	28th March 2005 09:13 PM

15th April 2008, 11:16 PM	#2
c.dizzle Gear nut Join Date: Feb 2003 Location: pittsburgh, pa Posts: 80	Anybody??????

15th April 2008, 11:30 PM	#3
thx1138 Guest Posts: n/a	****head

15th April 2008, 11:34 PM	#4
n***N Gear maniac Join Date: Apr 2008 Location: Earth Posts: 298	check your latency settings...It should not be higher than 15 ms. Personally, I never used more than 10.

15th April 2008, 11:44 PM	#5
jupiter8 Gear addict Join Date: Feb 2006 Posts: 487	You can turn of delay compensation can you not ? Check that it is on. And i believe you can have it turned off for plugins with higher than x ms latency (where x is user adjustable). Look in the manual about delay compensation, that's the best tip i can give for the moment. Could be the NI plugins does'nt report their latency to Cubase but that sounds highly unlikely.

16th April 2008, 10:30 PM	#6
c.dizzle Gear nut Join Date: Feb 2003 Location: pittsburgh, pa Posts: 80	Thanks guys! Yeah, I'm currently checking to see if PDC is disabled. I used to be on Nuendo and I remember it being easier to find. Also, to quote jupiter 8, "And i believe you can have it turned off for plugins with higher than x ms latency (where x is user adjustable)." This is very interesting, I was unaware of this. I'll check on this as well. To divine chemical; If it's digital there's latency, hardware or software. There's plenty of good digital both hardware and software. Native Instruments is one of the few companies that is making software with no analog equvalents. Analog vs. didgital, hardware vs. software is a dull, tired debate. I put in an e-mail to native instruments as well, waiting on their response.

16th April 2008, 11:13 PM	#7
pyvnd Lives for gear Join Date: Nov 2007 Posts: 575	Don't mind DC, he has a lot of opinions. I was going to suggest you contact NI as well simply because they are the best at the technical aspects of their software. It takes a little while but they usually respond with something useful.

17th April 2008, 02:56 AM	#8
c.dizzle Gear nut Join Date: Feb 2003 Location: pittsburgh, pa Posts: 80	no worries! i actually kinda wish that NI would come out with a hardware version of Reaktor ala Kyma. but that's neither here nor there. I got a response and am e-mailing my session to NI. I tried toggling the constrain delay comp on and off. There is a change in tone but it still phases. For more info, I have a stereo drum loop on a track. The track has been duplicated and reaktor's FlatBlaster is placed on the track. I've got my wet and dry. And they phase!!!!! They shouldn't. I've been interested in abusing some of the more traditional processing and fx in the NI catalog to find out if any of it has a unique sound of it's own. Like, for instance, "Gee I love the sound of FlatBlaster and a Neve 1081 on that snare!" I'll share any cool findings. carl P.S. My old boss just bought Glen Ballard's euphonix console!!!!! the one Alanis Morisette's Jagged Little Pill was done on!!! LOL!!!

21st May 2009, 07:11 AM	#10
ass_tronaut Gear interested Join Date: Feb 2009 Posts: 5	Hey im running protools 7 on a hd system and am trying to get ni komplete 2 to run via protools. I have tried to update ni komplete and the updates dont seem to work. The programs run stand alone fine but wont show up in RTAS plug ins in protools. ANy help would be good!!! Should i upgrade to PT 8 b4 i continue with this BS?