All Advertisers
| All Advertisers |
| |||||||
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ART - Pro MPA & Pro VLA | woods | So much gear, so little time! | 23 | 28th February 2008 04:54 AM |
| Rode k2, focusrite vm pro, firewire solo, nuendo..... | yoyoyoyo1 | Rap + Hip Hop engineering & production | 2 | 21st August 2006 04:07 AM |
| Problems with Line6 POD xt Pro and AES/EBU Connection to Pro Tools HD | Andi Rauscher | So much gear, so little time! | 7 | 8th April 2006 11:56 PM |
 |
| | Thread Tools | Search this Thread | Rate Thread | Display Modes |
24th December 2006, 03:04 AM
| #1 |
| Gear maniac  Join Date: May 2006
Posts: 224
 | Kenton Pro Solo mk1 & SCI Pro-One Hey guys, I just grabbed a Kenton pro solo midi to cv converter and have tried hooking it up to my Pro-One but the bastard isn't co-operating. Pretty sure I have everything setup correctly on the kenton... the only thing I can think of is the power adaptor. Apparently the pro-one uses 15v for gate but the power adaptor for the kenton is only 12v. Would this have anything to do with why I can't get it to control the pro-one? cheers G |
|  |
|
24th December 2006, 03:21 AM
| #2 |
| Gear maniac Join Date: May 2006
Posts: 224
| never mind! just figured it out. it was the cables! for anyone thats interested, i was using mono 3.5mm to 6.5mm, then tried stereo cables and it worked. |
|
| |
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
| |
Linear Mode
