Diffuser design (AFMG reflex plans)
agonist
Thread Starter
#1
16th June 2013
Old 16th June 2013
  #1
Gear Head
 

Thread Starter
Diffuser design (AFMG reflex plans)

Hi, i've been interested in building finless diffusers inspired by the A1LF diffuser that Arqen posted here on GS.

The problem was that the designs used multiples of 10mm but most UK sheet materials tend to come in multiples of 3mm (i.e 3mm upto 24mm).

The idea is they would be 600mm in length. I think of the 3 designs ive made i'm more inclined to go with the 7 slat design, any input appreciated
agonist
Thread Starter
#3
17th June 2013
Old 17th June 2013
  #3
Gear Head
 

Thread Starter
had a read of your comment there. very useful. so in other words...recreate a model as an array that is 16x the depth to get a realistic idea of scattering and diffusion. I had tried an array of 5 but never checked if this was 16x the depth. I've since changed the design from above for optimisation so will try as an array.
Thread Tools
Search this Thread
Search this Thread:

Advanced Search
Forum Jump
 
Register FAQ Search Today's Posts Mark Forums Read

SEO by vBSEO ©2011, Crawlability, Inc.