control room window

hugolast · 13th April 2010

Im trying to improve my control room and at the moment i have the window out on this side, the live room side of the two layers is tilted downwards slightly and is still in place? Any ideas how i can improve the window or the area between it whilst putting it back together (good sealands, stuff in the cavity etc).

Thanks alot guys,]

dave (the yard studio) - just learning!

DanDan · 15th April 2010

The area inside the glass (the surrounding frame) needs to be absorbent to dampen any resonances which build up in there. I believe this is very important, so do it well.
DD

13th April 2010	#1
hugolast Gear interested Joined: Apr 2010 Posts: 21 Thread Starter	control room window Im trying to improve my control room and at the moment i have the window out on this side, the live room side of the two layers is tilted downwards slightly and is still in place? Any ideas how i can improve the window or the area between it whilst putting it back together (good sealands, stuff in the cavity etc). Thanks alot guys,] dave (the yard studio) - just learning!

15th April 2010	#2
DanDan Lives for gear Joined: Aug 2003 Location: Cork Ireland Posts: 6,813 1 Review written	Edges The area inside the glass (the surrounding frame) needs to be absorbent to dampen any resonances which build up in there. I believe this is very important, so do it well. DD

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
control room window	hugolast	Studio building / acoustics	3	10th April 2010 07:21 PM
Control Room Window- How to build?	music	Studio building / acoustics	10	17th November 2003 05:17 PM
Placing control room window	DigiDutch	So much gear, so little time!	2	2nd September 2003 09:04 PM