Question!!!

Sonic Pit · 29th October 2009

Hey guys, I'm new here as far as posting but have been coming here for a long time for information.

My question is: 2 of the corners in my studio have doors in them. If I make a bass traps that I can move will they be as effective? Planning on using roxul safe and sound. 703 is tough to find in Canada. Also, if I put a slab of Safe N Sound on 1/4" ply and and use fabric to hold it in place will I lose effectiveness from having a hard back? I would put it flush against the wall if I were to make them this way. Any thoughts would be great.

Thanks.

Glenn Kuras · 29th October 2009

Sure you can put them on stands. Our customs do it all the time.

Quote:

Also, if I put a slab of Safe N Sound on 1/4" ply and and use fabric to hold it in place will I lose effectiveness from having a hard back?

If you plan on straddling the corner you do not want any kind of wood back.

Sonic Pit · 30th October 2009

Sorry I forgot to mention the plywood backed designs would be for MF and HF absorbers not the bass traps. Would the plywood back be ok for those?

Glenn Kuras · 30th October 2009

Quote:

Originally Posted by Sonic Pit

Sorry I forgot to mention the plywood backed designs would be for MF and HF absorbers not the bass traps. Would the plywood back be ok for those?

Yea you can go that way.

29th October 2009	#1
Sonic Pit Gear interested Joined: Oct 2009 Location: Napanee Ont Posts: 7 Thread Starter	Question!!! Hey guys, I'm new here as far as posting but have been coming here for a long time for information. My question is: 2 of the corners in my studio have doors in them. If I make a bass traps that I can move will they be as effective? Planning on using roxul safe and sound. 703 is tough to find in Canada. Also, if I put a slab of Safe N Sound on 1/4" ply and and use fabric to hold it in place will I lose effectiveness from having a hard back? I would put it flush against the wall if I were to make them this way. Any thoughts would be great. Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
Question about trying to track a blasting amp (pad question).	t56tr	Low End Theory	5	20th May 2008 02:02 AM
Balanced/Unbalanced Vocal Chain Question Question	ghetto3jon	So much gear, so little time!	15	17th December 2007 02:46 AM
easy tape transfer question(sound question)	numrologst	So much gear, so little time!	2	13th March 2007 08:22 PM
Cubase Hard drive Usage question and PDC question	Methlab	Music computers	9	29th November 2006 03:37 PM
Kurzweil K2500R question, and Roland D550 question	RIZ Records	Rap + Hip Hop engineering & production	6	5th September 2006 05:47 PM

30th October 2009	#3
Sonic Pit Gear interested Joined: Oct 2009 Location: Napanee Ont Posts: 7 Thread Starter	Sorry I forgot to mention the plywood backed designs would be for MF and HF absorbers not the bass traps. Would the plywood back be ok for those?