wrapping corners of panels.

[therecordinghous]

helping a friend wrap some 703 with fabric today. using 3M spray adhesive to attach the fabric. it has foil on the back, so we are just doing one side. any advice on wrapping the corners?

pictures welcome

[Glenn Kuras]

You want the foil to go the front if making bass traps. If making thinner panels for the early reflection points then you want to remove the foil all together. The foil will do 2 things
1)Help reflect some of the high end back in the room
2)Act as a membrane which will help absorb a bit more low end.

[therecordinghous]

figured out a handy way to do the corners. thanks...