Very Low Freqs bass trap material and dimensions advice required

[Lemonsqueezer]

Originally Posted by Tomer1

I believe every room should be looked into independently to maximize treatment effectiveness\minimize problems and spend your money wisely.

I am a little confused. Surely if one believes in treating rooms independently then measuring the room is a good idea? and the best way to communicate the results for peer assessment and feedback would be to post them?

[kraskland]

Originally Posted by Throttler

P.S. anyone knows where I can find 705 in Europe ?

Owens-Corning fiberglass insulation isn't available in Europe. I called them up about it and they asked me if I wanted to be a distributor. Anyway, Rockwool is available which works well too.

[Lemonsqueezer]

Originally Posted by kraskland

Owens-Corning fiberglass insulation isn't available in Europe. I called them up about it and they asked me if I wanted to be a distributor. Anyway, Rockwool is available which works well too.

I found Rocksilk which is usally cheaper and comes in better dimensions for making super chunks 1200mm x 600mm. Where the Rockwool is 1000mm x 600.

[Tomer1]

Originally Posted by Lemonsqueezer

I am a little confused. Surely if one believes in treating rooms independently then measuring the room is a good idea? and the best way to communicate the results for peer assessment and feedback would be to post them?

Agreed,
This is a major part of "doing it yourself",
Its always smart to consult other people.

[kraskland]

Originally Posted by Lemonsqueezer

I found Rocksilk which is usally cheaper and comes in better dimensions for making super chunks 1200mm x 600mm. Where the Rockwool is 1000mm x 600.

Where did you buy it from? All I can find in Belgium is 60mm thick Rockwool, and it's 800mm x 500mm, cut in half diagonally.

[Lemonsqueezer]

Originally Posted by kraskland

Where did you buy it from? All I can find in Belgium is 60mm thick Rockwool, and it's 800mm x 500mm, cut in half diagonally.

I am in the UK

Try here or here

Not sure if they ship to other parts of Europe.

Good luck

[kraskland]

Originally Posted by Lemonsqueezer

I am in the UK

Try here or here

Not sure if they ship to other parts of Europe.

Good luck

Thanks! I'll give them a try.

[etherealmotive]

Hello, I live in toronto. Where can I buy Owens Corning 705 or 703? I've called so many stores and had no luck.

[JB872]

Originally Posted by etherealmotive

Hello, I live in toronto. Where can I buy Owens Corning 705 or 703? I've called so many stores and had no luck.

Just use Safe 'N' Sound from homedepot and make a wooden frame for it. If you're really set on rigid fibre glass, Roxul makes Rockboard 40 and 60 as well.

[Tomer1]

Lets put some life back into this oldish thread,

Any progress regarding the troublsome lows?