Room measured, help evaluate please

datune · 16th May 2008

Hello!

So after adding 9 broadband absorber panels using two layers of 10 cm fiberglass panels from http://www.ursa.be/_files/TFURSAwalltec.pdf.pdf, and 3 balls of http://www.ursa.be/_files/TFURSAhometec.pdf.pdf standing in corners, below graph shows my room (I did not measure before treatment because I didn't have the mic at that time)

It seems to me that the result is anything but good?

Glenn Kuras · 16th May 2008

bet you it is a lot better then it was before hand.

Glenn

Weasel9992 · 17th May 2008

Can you give us the shape and dimensions? It looks like you have a primary mode around 40Hz with predictable responses at the harmonics, but more info would be helpful.

Frank

datune · 17th May 2008

Hello!

Thanks for replying everybody, however, I'll be making new measurements soon, since I completely rearranged the room.

16th May 2008	#1
datune Lives for gear Joined: Oct 2007 Location: Vienna Posts: 674 Thread Starter 2 Reviews written	Room measured, help evaluate please Hello! So after adding 9 broadband absorber panels using two layers of 10 cm fiberglass panels from http://www.ursa.be/_files/TFURSAwalltec.pdf.pdf, and 3 balls of http://www.ursa.be/_files/TFURSAhometec.pdf.pdf standing in corners, below graph shows my room (I did not measure before treatment because I didn't have the mic at that time) It seems to me that the result is anything but good? __________________ Jürgen Hauser ----------------- How my Voyager went from Black to White "You're just an analog guy in a digital world, aren't you?"

17th May 2008	#3
Weasel9992 Lives for gear Joined: Jun 2006 Location: Savannah, GA Posts: 4,339	Can you give us the shape and dimensions? It looks like you have a primary mode around 40Hz with predictable responses at the harmonics, but more info would be helpful. Frank __________________ Frank

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread starter	Forum	Replies	Last Post
When you talk about RMS levels, do you mean sine-wave measured (AES-17), or square-w.	Hepha Luemp	So much gear, so little time!	1	2nd April 2008 06:30 PM
Please help me evaluate this mastering job!	TCW	So much gear, so little time!	7	27th February 2008 07:13 AM
Has anyone measured the Mbox2 Pro's recording offset in LP7?	Schmacko	Music computers	0	4th September 2007 10:24 PM
Diode VCA - built and measured. What output-amp is best?	jrp	Geekslutz forum	5	15th April 2007 03:17 PM
What AU Compressors should I evaluate and buy?	rnbeatz	Music computers	8	17th May 2004 05:24 PM

16th May 2008	#2
Glenn Kuras Gear Guru Joined: Jul 2005 Location: Atlanta, GA Posts: 11,995	bet you it is a lot better then it was before hand. Glenn