All Advertisers
| All Advertisers |
| |||||||
| Notices |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| When you talk about RMS levels, do you mean sine-wave measured (AES-17), or square-w. | Hepha Luemp | So much gear, so little time! | 1 | 2nd April 2008 06:30 PM |
| Please help me evaluate this mastering job! | TCW | So much gear, so little time! | 7 | 27th February 2008 07:13 AM |
| Has anyone measured the Mbox2 Pro's recording offset in LP7? | Schmacko | Music computers | 0 | 4th September 2007 10:24 PM |
| Diode VCA - built and measured. What output-amp is best? | jrp | Geekslutz forum | 5 | 15th April 2007 03:17 PM |
| What AU Compressors should I evaluate and buy? | rnbeatz | Music computers | 8 | 17th May 2004 05:24 PM |
 |
| | Thread Tools | Search this Thread | Rate Thread | Display Modes |
16th May 2008, 09:00 PM
| #1 |
| Gear nut Join Date: Oct 2007 Location: Belgium
Posts: 81
| Room measured, help evaluate please Hello! So after adding 9 broadband absorber panels using two layers of 10 cm fiberglass panels from http://www.ursa.be/_files/TFURSAwalltec.pdf.pdf, and 3 balls of http://www.ursa.be/_files/TFURSAhometec.pdf.pdf standing in corners, below graph shows my room (I did not measure before treatment because I didn't have the mic at that time) It seems to me that the result is anything but good?  
__________________ "Never argue with an idiot. They will bring you down to their level and beat you with experience." |
|  |
|
16th May 2008, 10:41 PM
| #2 |
| Lives for gear  Join Date: Jul 2005 Location: Atlanta, GA
Posts: 3,228
| bet you it is a lot better then it was before hand.  Glenn |
| |
|
17th May 2008, 05:46 PM
| #3 |
| Lives for gear  Join Date: Jun 2006 Location: Savannah, GA
Posts: 592
 | Can you give us the shape and dimensions? It looks like you have a primary mode around 40Hz with predictable responses at the harmonics, but more info would be helpful. Frank
__________________ Frank Oesterheld - GIK Acoustics www.GIKAcoustics.com |
|
| |
|
17th May 2008, 08:50 PM
| #4 |
| Gear nut Join Date: Oct 2007 Location: Belgium
Posts: 81
| Hello! Thanks for replying everybody, however, I'll be making new measurements soon, since I completely rearranged the room.
__________________ "Never argue with an idiot. They will bring you down to their level and beat you with experience." |
|
| |
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
| |
Linear Mode
