Gearslutz.com - View Single Post

johnwayne · 22nd November 2006

Thanks for the reply Glenn. I have 2" Mineral wool coming in 2' X 4'. I'm planning on doubling up to make some 4". So the 3 corners should all be 4"? I have two in every corner, the gobo is covering the other corner, one stacked on another.

I was planning on making the cloud 4" or should 2" suffice?

This is not the control room. I have another room which I'm also working on. I'm trying to make it work with 18 2" 2' X 4' panels covered in Burlap around a wooden frame.

Any suggestions would be greatly appreciated.

22nd November 2006	#4
johnwayne Lives for gear Joined: Nov 2006 Location: Decatur, Ga Posts: 612 Thread Starter	Thanks for the reply Glenn. I have 2" Mineral wool coming in 2' X 4'. I'm planning on doubling up to make some 4". So the 3 corners should all be 4"? I have two in every corner, the gobo is covering the other corner, one stacked on another. I was planning on making the cloud 4" or should 2" suffice? This is not the control room. I have another room which I'm also working on. I'm trying to make it work with 18 2" 2' X 4' panels covered in Burlap around a wooden frame. Any suggestions would be greatly appreciated. __________________ Slide Guitar and Blues Guitar Lessons www.learningguitarnow.com