View Single Post
Old 10th October 2006, 05:27 PM   #7
musictech
Gear maniac
 
musictech's Avatar
 
Join Date: Jul 2003
Location: Seattle, WA USA
Posts: 220
OK... that first one worked. Now here is the layout as drawn up by the acoustic consultant before I did any work. The gear closet sticking out into the garage is not to scale... he left that to use to figure out what we needed... it's actually wider and deeper than shown on the drawing.

Also, he ran the numbers for a rectangular room to figure out the best dimensions and figured we should lower the ceiling or raise the floor a bit to get to the best ratio, but that was too much work and not in my budget, so I left the ceiling and floor the way they were (about 4" higher than his recommended height).

He also put an option in to add a second wall and door inside the studio space, but that would greatly reduce the size of that already fairly small room, and isolation was not my primary concern with the remodel.
Attached Thumbnails
studio-remodel-photo-story-studio_after.jpg  
__________________
DBAR Productions & MusicTECH - Greater Seattle area
Producers & Composers Wanted for
LoopLibrary.com & NetMusicLibrary.com!
musictech is offline   Reply With Quote