Quote:
|
But if I was mounting them on the wall I would probably "hang" them on ordinary shelf consoles. Just make sure the consoles are long enough so you can space the traps out from the wall. If the lower part of the trap tends to tilt in, just put some distances there.
|
I just mounted my broadband absorbers yesterday and heres how I did it. 4" 0f OC703 and or 705 in a 1x8 frame with a 2 inch air space to the wall. A total of 5.5" from the OC to the wall. And then I made some 2" spacers and mounted them to the bottom of the panels.