Quote:
Originally Posted by myfipie  Well on a 4x2 4" panel it would give you 50% more exposed area if the sides are open.. 6"? well, check my numbers but that would be 75% more exposed would it not?
Nice DYI dude!  ... You may want to think about putting some FRK on the fronts. This will help with a little more low end and also keep the room from going "DEAD" on the high end.
Glenn |
You're right. I did the math and if I could fully expose the side, top and bottom the area would increase about by 80%! With the framing a more realistic figure would be in the 40% area. I didn't think it was so much. Unfortunatly these absorbers are allready done but I've allready plans for another batch so I probably make them with exposed sides.
Thanks for the advice on the FRK. Each trap is made of 3 slabs, I want them to absorb hi end aswell. What about putting FRK so it's facing the front between the first and second slab?
Thanks again!
/Cojo