|
Well first off, not everything that's got xlr plugs will need xlr's on the front.
I would get a little patch panel that has xlr inputs on it that are hardwired to the inputs of your pre's...
and then the outputs from those to the top row, first set of jacks on your patchbay...
normalled in the row underneath to either the line inputs on your rosetta or the line inputs on something else, e.g. distressor...
and then the line outs of the distressor wired to the top row a few jacks down (to leave room for expansion maybe to the rosetta... and anything you just patch in and out place near the other end and do not normal those... just leave them for straight through patching...
make sense at all?
|