|
Hi,
we run a VMS70 with SAL74b in our vinyl mastering.
You need to be carefull with excessiv high and lows and also with out of phase signals to prevent track kissing.
Excessiv highs and also lows could blow the cutterhead, if you don't use the "cutting current limiter", which afaik we only pretty rarely do, because it changes the sound dramaticly.
I'm not our vinyl guru, but I'm the one who's writing to that board, if you want, I could get you in touch with our two guys who run the vinyl thing.
regards,
wolfgang
toolhouse studios, germany
|