Quote:
Originally Posted by Overdrive  What have you used for the diffusers? Is it wood front or MDF? I am not sure but I could spot several diameters for the drilled holes-and was wondering what size holes went in your design.
It would be interesting if you could elaborate more about the acoustic design that went in.
Great work unfolds. |
Best explanation I found was:
" The Diffusion Panels provide efficient acoustic absorption in the low mid frequency range, while proving a degree of scattering/diffusion at higher frequencies.
The absorption characteristics of the perforated panels vary depending on the distance they are supported away from a solid boundary. The closer to the boundary, the lower the overall absorption at higher frequencies.
The panels can be mounted at an angle to the room boundaries to reduce effects such as "flutter echo".
When arrayed in groups in front of a solid, flat boundary, the diffusion effect of the panels extends to the lower mid frequencies."