|
i believe you can use the the FF800 in stand alone mode, just set the i/o in total mix first. then you can go in and out of the 002 via ADAT and SPDIF and the 002 A/D will be fine when clocked from the RME. the only limitation is that ADAT is limited to 48KHz.
if you can wait the M-Audio Light bridge should work for well for you as you will be able to use all the RME analogue i/o over both of the ADAT and the spdif i/o and you could even use 88/96KHz if you needed to (only 10 channels of course).
the 002 is better hardware than anything M-Audio comes out with but just for digital i/o there wouldnt be a diffference as long as you dont need any of the features in PT that are LE only.
|