MR2 MR3 Transformer
Basically the stock transformers on the MR2 and MR3 are the Output to Tape Feed and the Output to FX Loop Feed. There may bave been optional Mic Pre retrofits from the factory, but the stock Mic Pre didn't have a Transformer. Telefunk, Can you take a picture of one of these Mic Pres with the Jensen 115s and post it. Curious to see how this was installed on these channels.
I'm Running a 26 Channel MR2 that I Hand Built the Console Cabinet and Frames and hand wired the 4 Motherboards on. This particular set of Channels did not have the Transformers. My understanding is there was a less expensive transformer delete option on these. I'm in the process of interfacing the MR2 with a Pair of Focusrite Saffire Pro 26s and a Pro 10 to give me 24 A/D D/A. Playback is working fine.... However the signal from the Mic Pres is a little weak and I am working on impedence matching. Thinking about reinstalling some Output Transformers.... Any Ideas on this would be greatly appreciated....