Originally Posted by Trill Trax
Okay here is the deal. I'm working on a play with a local theatre as a sound designer and engineer. The theatre has four monitors on the left/right walls and then six main monitors. Two hanging facing the crowd, two on the side and then immediately two behind them facing the stage plus a sub.
Here is the mixer. Mackie - 1202-VLZ3
The four monitors on the wall are passive and are connected to two amps via banana plugs.
Here is the question. How do I connect everything up? I've gotten it semi working with one set using the main outs on the board and then the 2nd set using an aux send.
The main monitors however are routed via snake and are poorly labeled. If you could advise how I can connect all these units together it would be great!
-do the amps have ins and outs?
-you can go and buy some y splitters
-are there sub grp outputs
-run a ipod for sig to relabel your snake