s9dd

Hi Folks,

I have a SC6000P with a few faults I'd like to fix / have fixed.

When the device is warmed, the SIP light glows in and out randomly. When its at its brightest, the audio fails, and the studio goes silent for a second or two, then comes back. Odd. Can't leave it like this, need some guidance on what to fix.

The RH channel also fails. Turning the signal levels way up loud will drive it to make the connection again, but on low signal levels you can guarantee it will cut out. This affects the headphone signal as well.

Related to both the above the stereo image seems vague and to shift. Hoping that by solving the above, the image will stay put.

Buss 1 is also dead. Not sure what the issue is here at all.

I am hoping to find someone here who can help with identifying likely causes and remedies. I have basic tools and fabricated test harness cables for the master module so it can be worked on out the main console.

If anyone can help I'd be very grateful.

[Studio - Portsmouth/Southampton/M27]