Gearslutz.com - View Single Post - opinions

NesNeedsGear · 12th July 2006

thanks guys.

i actually took off quite a bit of low and low mids from the lead vox. high-pass filter at about 100hz, since I was getting a bit of Proximity effect that I didn't dig too much.

then did a wide cut at 250 and some cut at 1.2k. added a bit of 10k shelf...and this is it.

the chain was mxl v69 (mullard NOS tube) ~~> fmr rnp ~~> ART VLA (stock tubes) ~~> Emu 1820m~~> Nuendo.

I'll try compressing the beat through the ART compressor and see if it fattens up the high end.

anything else?

12th July 2006	#4
NesNeedsGear Lives for gear Joined: Feb 2006 Location: NYC Posts: 833 Thread Starter	thanks guys. i actually took off quite a bit of low and low mids from the lead vox. high-pass filter at about 100hz, since I was getting a bit of Proximity effect that I didn't dig too much. then did a wide cut at 250 and some cut at 1.2k. added a bit of 10k shelf...and this is it. the chain was mxl v69 (mullard NOS tube) ~~> fmr rnp ~~> ART VLA (stock tubes) ~~> Emu 1820m~~> Nuendo. I'll try compressing the beat through the ART compressor and see if it fattens up the high end. anything else? __________________ "As long as the reason of man continues fallible, and he is at liberty to exercise it, different opinions will be formed." James Madison, 1751-1836