Originally Posted by monkeyxx
I think you'd just want to wire up a couple of these into some XLRs T-Pad / H-Pad Calculator - Resistor Values for Attenuation
make sure you get the impedances in the right range, and you might want to attenuate as much as -40 dB.
make sure not to run phantom power from the VP26 into whatever line output you're using!!
a less cheap option is a Radial JDI Duplex and the transformers will isolate from any phantom power accidents. you also get the Jensen transformers in line for even more coloration
These work well too and are reasonably priced:
Naiant MPD 40dB line to mic level inline attenuator ($13) Naiant - Inline Devices