| directly from the manual:
Pro Tools LE as Word Clock Slave
In order to slave Pro Tools to an external Word
clock source, you must configure Word clock as
the Pro Tools Clock source, as follows:
To configure Pro Tools LE with 003 or 003 Rack as
a Word clock slave:
1 Make sure all Word clock and audio connections
are correct as described earlier in this section.
2 Make sure the external Word clock source is
powered on, and configured to output 1x Word
clock. (Be sure to verify any required termination;
see the manufacturer’s documentation if
you need more information on the particular requirements
for your device.)
3 Launch Pro Tools.
4 Choose Hardware > Setup.
5 Click the Clock Source pop-up menu and
choose Word Clock.
6 Click the Sample Rate pop-up menu and
match the sample rate of the external Word
clock source.
7 Click OK.
It really does pay to read the manual...
|