Gearslutz.com - View Single Post - QRD Diffuser Design
View Single Post
Old 16th June 2011   #16
T1M0N
Gear nut
 
Joined: Jul 2007
Location: Bavaria / Germany
Posts: 78

Yes that's what I think. For me it's really hard to imagine, that this could work, especially with the depth 7-channel. But I found it hard to imagine how diffusors work anyway, so perhaps someone can tell me the folded wll logic and I am enlighted. Just not smart enough to figure it out myself. And to build it and see what happens is difficult in my opinion, because I wouldn't know how to measure and rate the results.

I would really like to read what Cox et al have written about this subject, I think I will buy the book.

My design was only a fast idea, perhaps not the best that's possible (why limit yourself to 90° angles, with 45° angles there are even more possibilities), just to demonstrate what I think is above the limits of this design, and to see if someone can tell where the limits are and what the drawbacks are or how the math changes.
T1M0N is offline   Reply With Quote