|
It's hard to say. Since that thing is solid state, you don't have to load each output with 4 ohms. You can wire the thing up for stereo (but you don't have a pan or balance, so you can't blend the speakers to taste), you could wire the speakers in parallel (4 ohms) and run them off of one side. Or, you could wire them in parallel and run them off of the bridged mono output.
I wouldn't wire them in series, as this amp seems to want to drive a low impedance and 2 x 8 ohms in series is 16 ohms.
From the block diagram, it looks like this thing has speaker simulators hardwired to the pre-amp and line in. Maybe this thing wants to drive full range speakers, not guitar cabinets......
-tINY
|