Gearslutz.com - View Single Post - I'm building a passive monitor controller.

Cojo · 26th March 2006

Ok, I have done some listening tests according to Ulysses suggestions so if you have it in the middle position it will be possible to use it as a "crank it up" and "bring it down to whispering low" level switch. The values I have found that seems to work have been: 0dB(top pos), -8dB(mid pos) and -24dB(bottom pos). Any suggestions or could these values work?

Thanks for the inputs so far!

/Cojo

26th March 2006	#14
Cojo Lives for gear Joined: Dec 2005 Location: Gothenburg, Sweden! Posts: 1,471 Thread Starter	Ok, I have done some listening tests according to Ulysses suggestions so if you have it in the middle position it will be possible to use it as a "crank it up" and "bring it down to whispering low" level switch. The values I have found that seems to work have been: 0dB(top pos), -8dB(mid pos) and -24dB(bottom pos). Any suggestions or could these values work? Thanks for the inputs so far! /Cojo __________________ Conny Johansson [ www.asteroidkiller.com ]