Gearslutz.com - View Single Post - Scsi and the Ensoniq EPS
View Single Post
Old 24th February 2011   #19
JaeOne3345
Lives for gear
 
JaeOne3345's Avatar
 
Joined: May 2005
Posts: 1,352

In regards to scsi and the 16+:
That is all dependent on which eps16 scsi card you have.

Third party 16+ scsi cards supplied the termination power needed for a zip.

The OEM scsi card (without modification) did/does not work reliably with 9/10 zip drives because of the lack of term power. You run into things such as it might be recognized, but fail at saving, etc.

To get my zips to work, I used to add the termination power myself, used an inline termination power device, or used another device somewhere in the scsi chain to supply term power.

Later I started using a couple compact flash devices that supplied the termination power itself, so I no longer needed any modifications or other devices inline.

Regarding the original eps/epsm and scsi:
These things were always hit and miss with scsi, regardless of a 2.4 ROM/2.49 OS. They worked fairly reliably for me with old ass syquest type drives, but who wants to deal with those all of the time?
__________________
"..but if i put it in a verse, y'all would rather listen to some bullsh*t first.."
JaeOne3345 is offline   Reply With Quote