Gearslutz.com - View Single Post

Mike H · 13th January 2006

I was under the impression that 110-ohm digital cable (specifically Canare DA-206) for line level analog service is not only adequate but preferable, based on comments here and elsewhere:
http://gearslutz.com/board/showthrea...=digital+cable

Is that incorrect?

In service from the mic to the preamp, I mispoke. I actually have Gotham GAC-3 mic cable. However, for my information, I would be interested in understanding a little more about why the digital cable would not work here, also. Could you please explain the problem that's created with 110-ohm cable carrying a mic level signal?

Thanks,
Mike

13th January 2006	#7
Mike H Lives for gear Joined: Nov 2003 Location: Oregon Posts: 1,778 Thread Starter	I was under the impression that 110-ohm digital cable (specifically Canare DA-206) for line level analog service is not only adequate but preferable, based on comments here and elsewhere: http://gearslutz.com/board/showthrea...=digital+cable Is that incorrect? In service from the mic to the preamp, I mispoke. I actually have Gotham GAC-3 mic cable. However, for my information, I would be interested in understanding a little more about why the digital cable would not work here, also. Could you please explain the problem that's created with 110-ohm cable carrying a mic level signal? Thanks, Mike