Quote:
Originally Posted by Kenton  OK, just to chip in once again - doing the test as I described, the two files will NOT null because one bounce is done through the MixBus Saturation and the other bounce isn't. You should get around -72dB residue with the Tape Sat fully down, around -36dB with it where you would have it for normal use. |
Sorry I should have clarified that I again brought down the sources significantly(I believe all of them had to be at -30dB due to the amount of sources this time) so as not to activate the saturation circuit.
If I had let the saturation kick in at all it would have been significantly different.
Seablade