Gearslutz.com - View Single Post - Slightly more complicated mic wiring issue....

MrChrisos · 20th March 2010

Hi again,

I thought I'd start a new thread for this because it's quite a separate issue. I've wired up a pair of MKE2s to PH-Adapt XLR adaptors as supplied by sennheiser. Trouble is, neither seem to work!

On both mics, I'm getting virtually no signal, only the intereference when the preamps are up near full, and I can just about hear when I blow over them. The supplier thinks it might be a dip switch setting, but I can't see any switches of any sort on the PCB.

Any ideas?

Thanks guys.

20th March 2010	#1
MrChrisos Gear Head Joined: Feb 2010 Posts: 32 Thread Starter	Slightly more complicated mic wiring issue.... Hi again, I thought I'd start a new thread for this because it's quite a separate issue. I've wired up a pair of MKE2s to PH-Adapt XLR adaptors as supplied by sennheiser. Trouble is, neither seem to work! On both mics, I'm getting virtually no signal, only the intereference when the preamps are up near full, and I can just about hear when I blow over them. The supplier thinks it might be a dip switch setting, but I can't see any switches of any sort on the PCB. Any ideas? Thanks guys. __________________