Gearslutz.com - View Single Post - questions on safety diodes for a Symetrix 522

changeng · 12th March 2010

thanks, guys, but yikes. now I have three versions of where the ends of the diodes go. The circuit board itself makes it hard to trace which pins on the regulators are going to the 1000uF and which are going to the 4.7uF caps, so I'm surmising their placements from the schematic.

If I get this wrong, will I destroy the regulators or worse?

12th March 2010	#5
changeng Lives for gear Joined: Jan 2006 Posts: 883 Thread Starter 3 Reviews written	thanks, guys, but yikes. now I have three versions of where the ends of the diodes go. The circuit board itself makes it hard to trace which pins on the regulators are going to the 1000uF and which are going to the 4.7uF caps, so I'm surmising their placements from the schematic. If I get this wrong, will I destroy the regulators or worse?