Quote:
Originally Posted by kilon  Let me add that the multimode filter is actually 3 filters at once. Which mean that Instead of having 1 filter than can change between LP , HP and BP you have 3 filters 1 LP +1 HP+ 1 BP = 3 sounds simultanously |
Actually 2 sounds simultaneously in the multimode Filter, not 3.
It's either low pass or high pass + bandpass. Because if you engage both the LP + HP, you're turning Filter 1 into a Notch. That's even shown on the front panel of Andromeda, and is better understood by looking at the signal flow diagram. LP and HP in Filter1 are combined together into one output as can be seen below. So it's either: Low pass, or High Pass or Notch. Plus the bandpass or inverted bandpass from the same filter.
