Gearslutz.com - View Single Post

zerogravity · 29th January 2010

HAHA!

I would advise against a table saw. Get a mitre saw. Table saw would be very dangerous with the small pieces. I have both, i used the mitre. It took me about an hour or so to cut all 524 pieces ( I think that was the final count)

Good luck!

29th January 2010	#13
zerogravity Gear nut Joined: Jan 2010 Location: Fort Worth, TX Posts: 98	HAHA! I would advise against a table saw. Get a mitre saw. Table saw would be very dangerous with the small pieces. I have both, i used the mitre. It took me about an hour or so to cut all 524 pieces ( I think that was the final count) Good luck!