Gearslutz.com - View Single Post - Best way to record off of a Soundcraft EPM mixer

hgen · 21st December 2009

You can take 8 channels off the inserts into 8 inputs. Or you can send output thru the Auxillary channels out to the inputs ie. 2 channels L & R, just remember to turn up the Aux knob till you get a good signal, connect aux outs to 2 inputs.
Also run your outputs from the soundcard into the stereo in or spare channels on the EPM and you can record in real time without latency monitoring off the desk. The EPM has great sounding preampsand eq!

21st December 2009	#2
hgen 3 + infractions, forum membership suspended. Joined: May 2004 Location: Sydney, Australia Posts: 803	You can take 8 channels off the inserts into 8 inputs. Or you can send output thru the Auxillary channels out to the inputs ie. 2 channels L & R, just remember to turn up the Aux knob till you get a good signal, connect aux outs to 2 inputs. Also run your outputs from the soundcard into the stereo in or spare channels on the EPM and you can record in real time without latency monitoring off the desk. The EPM has great sounding preampsand eq!