| Okay so you have two interconnections ADAT Lightpipe and Coax Word Clock to the I/O-96. Where I/O 96 must act as the Master Clocksource.
While I/O 96 could represent each fader input in PT differently than the Digi003. If you see activity on inputs 9-16 on the I/O 96 you're just not hearing them through software IO setups.
If you see sync, generally it means it's working correctly on both sides, just the software needs a re-config based on what physical assignments are made to virtual faders. Also make sure the Optical connectors are not in SPDIF mode but ADAT Lightpipe. Max spec is 48khz per channel not 96khz (TOSLINK). |