Gearslutz.com - View Single Post - why can't i load / save channel strip settings in Logic 8?!

Schneider · 23rd November 2009

above inserts on each channel there is a box that is named 'Setting' (when it is not assigned)...

click and hold until the options appear...

'Save Channel Strip Setting As'

hope this helps!

23rd November 2009	#3
Schneider Gear maniac Join Date: Jun 2009 Posts: 162	above inserts on each channel there is a box that is named 'Setting' (when it is not assigned)... click and hold until the options appear... 'Save Channel Strip Setting As' hope this helps! __________________ everything is brilliant, nobody is happy